351 ASSAY FOR STEROIDS
The following procedure is applicable for determination of those Pharmacopeial steroids that possess reducing functional groups such as
Dissolve in alcohol a suitable quantity of the USP Reference Standard specified in the individual monograph, previously dried under the conditions specified in the individual monograph and accurately weighed, and dilute quantitatively and stepwise with alcohol to obtain a solution having a concentration of about 10 µg per mL. Pipet 20 mL of this solution into a glass-stoppered, 50-mL conical flask.
Prepare as directed in the individual monograph.
To each of the two flasks containing the Assay Preparation and the Standard Preparation, respectively, and to a similar flask containing 20.0 mL of alcohol to serve as the blank, add 2.0 mL of a solution prepared by dissolving 50 mg of blue tetrazolium in 10 mL of methanol, and mix. Then to each flask add 2.0 mL of a mixture of alcohol and tetramethylammonium hydroxide TS (9:1), mix, and allow to stand in the dark for 90 minutes. Without delay, concomitantly determine the absorbances of the solutions from the Assay Preparation and the Standard Preparation at about 525 nm, with a suitable spectrophotometer, against the blank. Calculate the result by the formula given in the individual monograph, in which C is the concentration, in µg per mL, of the Reference Standard in the Standard Preparation; and AU and AS are the absorbances of the solutions from the Assay Preparation and the Standard Preparation, respectively.
: Daniel K. Bempong, Ph.D., Scientist
Expert Committee : (MDPS05) Monograph Development-Pulmonary and Steroids
USP29NF24 Page 2565
Phone Number : 1-301-816-8143